Marine Paints, Jotun
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
0.00 Dhs
CompareTypical use
Marine:
Recommended for under water hull in drydocking. Designed for vessels trading at a range of speeds and
activities. This product can be used for 36 months on the vertical sides of a vessel and 60 months on the
flatbottom and boottop.
| Volume | 5L |
|---|
Brand
Jotun Paints
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, Jotun
Jotamastic 80 Blk /18.3 L Comp A 16L +B 2.3L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces.
- It can be applied at sub-zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Seaforce Active Dark Red 5L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides good fouling protection. This is achieved through self polishing characteristics reducing hull deterioration.
- To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Jotun Epoxy Filler Offwhite 2.5L Comp A 1.5L+ Comp B 1L
This is a two component non shrinking solvent free epoxy filler. It is high strength, providing the abrasion
resistance and compressive strength higher than concrete. To be used as filler only. Suitable for properly
prepared concrete surfaces.SKU: n/a -
Marine Paints, Jotun
Penguard HB white 5 L Comp A 4L+B 1L
- This is a two component, polyamide cured, high molecular weight epoxy coating.
- Designed as a high build, all purpose coating for new construction.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.
- Suitable for properly prepared carbon steel, stainless steel,aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.
SKU: n/a
There are no reviews yet.