Skippers Line Solver Primer
Anticorrosive primer and / or universal intermediate undercoat based on modified chlorinated rubber formulated with selected anticorrosive pigments and aluminum. It is recommended for all types of boats in traditional or chlorinated rubber cycles, especially as a connecting coat for any type of antifouling, for a remarkable resistance to the marine and industrial atmosphere. Also applicable on buildings and metal structures exposed to the marine environment.
0.00 Dhs
ComparePREPARATION OF THE SUBSTRATE AND APPLICATION CYCLE
Iron. A coat of EPOFOND AM-9 is applied to sandblasted iron at grade SA 2-2.5, allowing it to dry for 12-24 hours.
If it is not possible to carry out sandblasting, it is advisable to mechanically restore the iron to new condition; clean the surface and apply a base coat such as EVIOX CROMOMINIO and let it dry for 24 hours. Apply 1-2 coats of SOLVER PRIMER (spaced 24 hours between them) and overpaint with finishing enamel.
Hulls of Boats. For finishes with antifouling on boat hulls, apply 2-3 coats of SOLVER PRIMER on a suitable substrate, spaced 24 hours between them and overpaint with 2-3 coats of antifouling. Outboard of boats.For boat outboards and external constructions in general, apply 2 coats of SOLVER PRIMER on a suitable base, spaced 24 hours between them and overpaint with finishing enamel.
| Volume | 18L |
|---|---|
| color | Yellow |
| Typology | Single component |
| Type of binder sol a | Alkyd chlorinated rubber |
| Specific weight kg / l (± 0.05) | 1,250 |
| Dry residue (volume) | 40% |
| Viscosity ford | 20 ” (Ø8 at 20 ° C) |
| Storage + 23 ° C (± 2) | 30 months in sealed containers |
| Application | Roller and spray brush |
| Brush-roller dilution | 10-25% Thinner 400 |
| Spray dilution | 15-30% Thinner 400 |
| Touch dry | 2-3 hours (20 ° C) |
| Overcoating time | minimum 6 hours (20 °) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Recommended dry thickness | 60-70 microns per hand |
| Theoretical yield m2 / liter | 4-6 |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, International
International Intergard 5600 20L
A light coloured, epoxy universal primer
- For use as an anticorrosive universal primer in ballast tanks, outer hull, cofferdams, void spaces, decks, cargo holds and crude oil tanks.
- Suitable for use with controlled cathodic protection.
- For use at Newbuilding or Maintenance & Repair.
SKU: n/a -
-
Marine Paints, Jotun
Jotamastic 80 Blk /18.3 L Comp A 16L +B 2.3L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces.
- It can be applied at sub-zero surface temperatures.
SKU: n/a -
There are no reviews yet.