Skippers Line Unifiber Primer
One-component primer for direct application on fiberglass hulls as a low thickness anchoring coat. Also used as a primer for antifouling or intermediate for joining two-component epoxy and / or polyurethane products and one-component finishes. Overpaintable with Topkapi enamel for finishing on superstructures and topsides or with suitable antifouling in the case of boat hulls.
0.00 Dhs
ComparePREPARATION OF THE SUPPORT AND APPLICATION CYCLE
New fiberglass. The surface must be perfectly clean, degreased with suitable detergents, rinsed lightly, sanded with fine sandpaper and dusted. Apply a coat of UNIFIBER PRIMER and let it dry for 6-8 hours. Apply an intermediate coat of primer (NAUTICAL SUBSTRATE on topsides or SOLVER PRIMER on Opera Viva) and wait for the recommended drying. After 6-8 hours, sand and apply the desired one-component finish (one-component enamel or antifouling).
Fiberglass already painted with two-component.The pre-existing two-component paint must be well anchored to the substrate. Then sand and apply a coat of UNIFIBER PRIMER and let it dry for 6-8 hours. Apply an intermediate coat of primer (NAUTICAL SUBSTRATE on topsides or SOLVER PRIMER on Opera Viva) and wait for the recommended drying. After 24 hours, sand and apply the desired one-component finish (one-component enamel or antifouling).
| color | Green |
|---|
| Typology | Single component |
| Type of binder sol a | Modified vinyl |
| Specific weight kg / l (± 0.05) | 1.180 |
| Dry residue (volume) | 24% |
| Storage + 23 ° C (± 2) | 30 months in sealed containers |
| 50 sec. |
| Application | Roller and spray brush |
| Brush-roller dilution | 0-5% Thinner 765 |
| Spray dilution | 10-20% Thinner 765 |
| Touch dry | 20-30 minutes (20 ° c) |
| Overcoating time | minimum 6 hours (20 ° c) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Recommended dry thickness | 15 microns per hand |
| Theoretical yield m2 / liter | 10 |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, International
International Thinner GTA 007 5L
International Thinner GTA 007 is a specially formulated blend of solvents designed to mix with its compatible paint/coating to create optimal consistancy for application.It can also be used for cleaning some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes, Rollers and Spray Equipment after application.
SKU: n/a -
Marine Paints, International
International Micron 350 Antifouling Paint 2.5L
Micron antifoul has been a favourite for years among YouBoat customers, and the latest formula is no different. Micron 350 is a high strength self polishing antifouling that will offer excellent 2 seasons protection from just one application (3-4 coats)
SKU: n/a -
Marine Paints, Jotun
Jotun Epoxy Filler Offwhite 2.5L Comp A 1.5L+ Comp B 1L
This is a two component non shrinking solvent free epoxy filler. It is high strength, providing the abrasion
resistance and compressive strength higher than concrete. To be used as filler only. Suitable for properly
prepared concrete surfaces.SKU: n/a
There are no reviews yet.