Skippers Line Epozinc 1C
One-component zinc coating with high zinc content, easier to apply than two-component galvanizing coatings. Often used on carpentry structures to obtain an excellent anticorrosive effect.
0.00 Dhs
ComparePREPARATION OF THE SUPPORT AND APPLICATION CYCLE
NEW IRON SUPPORTS. Sandblasting to SA 2.5 SIS grade is required. Apply EPOZINC 1C diluted 5-10% with Diluente 400.
| color | Grey |
|---|
| Typology | Single component |
| Type of binder sol a | Modified alkyd |
| Specific weight kg / l (± 0.05) | 2.220 |
| Dry residue (volume) | 31% |
| Viscosity ford | 26 |
| Application | Roller and spray brush |
| Brush-roller dilution | 5-10% Thinner 400 |
| Spray dilution | 5-10% Thinner 400 |
| Touch dry | 15-30 minutes (20 ° C) |
| Overcoating time | 12-24 hours (20 ° C) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Recommended dry thickness | 50 microns per hand |
| Theoretical yield m2 / liter | 4-5 |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, International
International Interswift 6600 20L
Interswift 6600 is a patented, high volume solids, hydrolysing, self-polishing antifouling incorporating unique copper acrylate SPC technology. An economical alternative to Interswift 6800HS, Interswift 6600 can be used at Newbuilding and Maintenance & Repair for in-service periods of up to 60 months.
SKU: n/a -
Marine Paints, International
International Intergard 5600 20L
A light coloured, epoxy universal primer
- For use as an anticorrosive universal primer in ballast tanks, outer hull, cofferdams, void spaces, decks, cargo holds and crude oil tanks.
- Suitable for use with controlled cathodic protection.
- For use at Newbuilding or Maintenance & Repair.
SKU: n/a -
Marine Paints, Jotun
Jotamastic 80 Blk /18.3 L Comp A 16L +B 2.3L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces.
- It can be applied at sub-zero surface temperatures.
SKU: n/a -
There are no reviews yet.