Skippers Line Polifiber Primer
Special two-component primer formulated to give excellent adhesion on fiberglass surfaces. It is applied as a base coat on superstructures, sides or hulls of fiberglass boats. It can be applied directly on gelcoat after adequate degreasing of the surface with a suitable detergent and light sanding with fine abrasive paper.
0.00 Dhs
ComparePREPARATION OF THE SUPPORT AND APPLICATION CYCLE
Fiberglass and Plastic. The surface must be degreased with a suitable detergent, rinsed, lightly sanded with fine sandpaper and dusted. Apply a coat of POLIFIBER PRIMER, possibly followed by a second coat in the case of a very corrugated substrate. After 24 hours, sand with fine sandpaper and continue with the desired finishing cycle.
| color | White |
|---|
| Typology | Two-component |
| Type of binder sol a | Polyester |
| Type of binder sol b | Isocyanates |
| Specific weight kg / l (± 0.05) | 1.685 (A) – 1.040 (B) |
| Dry residue (volume) | 35% |
| Storage + 23 ° C (± 2) | 24 months in sealed containers |
| 40-60 sec. |
| Application | Roller and spray brush |
| Blend a + b by volume | 10 parts Sol.A with 3 Sol. B |
| Pot life a + b (20c) | Use mixture within 4-6 hours |
| Brush-roller dilution | 15-30% Thinner 203 or 205 |
| Spray dilution | 25-35% Thinner 203 |
| Touch dry | 2-3 hours (20 ° c) |
| Overcoating time | 18-24 hours (20 ° c) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Recommended dry thickness | 50 microns per hand |
| Theoretical yield m2 / liter | 10 |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, Jotun
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Seaforce Active Plus D Red 20L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss.
- To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures
SKU: n/a -
Marine Paints, International
International Intergard 5600 20L
A light coloured, epoxy universal primer
- For use as an anticorrosive universal primer in ballast tanks, outer hull, cofferdams, void spaces, decks, cargo holds and crude oil tanks.
- Suitable for use with controlled cathodic protection.
- For use at Newbuilding or Maintenance & Repair.
SKU: n/a -
There are no reviews yet.