Skippers Line Underlay Orange AT
Antirust for general use, it has a high content of active pigments which give the product a good anticorrosive and anti-pitting power. Recommended in synthetic cycles, it guarantees lasting protection. Other features are ease of application, fast drying, good adhesion to substrates, high hiding power. It is used in construction, carpentry and shipbuilding.
0.00 Dhs
ComparePREPARATION OF THE SUPPORT AND APPLICATION CYCLE
New iron. When it is not possible to sandblast, prepare the substrate with a mechanical brush or abrasive disc. The substrate must be clean, dry and well degreased, free from rust or traces of calamine. Remove brushing residues. Clean the surface with a rag soaked in Thinner 107 or Thinner 900. Apply 1 coat of SOTTOFONDO ARANCIO AT primer followed by a second coat after 24 hours if necessary. Overpaint with the required finishing enamel.
Already painted iron.If the old paints are not perfectly anchored or crumbly, they must be removed mechanically. Traces of rust must be removed with a mechanical brush or abrasive disc and sanded with medium abrasive paper (280-320). Clean the surface with a rag soaked in Thinner 107 or Thinner 900. Allow to dry thoroughly. Apply 1 coat of SOTTOFONDO ARANCIO-AT on the ironed parts, possibly followed by a second coat after 24 hours. Overpaint with the required finishing enamel.
| color | Orange |
|---|
| Typology | Single component |
| Type of binder sol a | Alkyd |
| Specific weight kg / l (± 0.05) | 1,540 |
| Dry residue (volume) | 54% |
| Viscosity ford | 14 sec. (Ø8 at 20 ° C) |
| Storage + 23 ° C (± 2) | 30 months in sealed containers |
| Application | Roller and spray brush |
| Brush-roller dilution | 15-25% Thinner 107 |
| Spray dilution | 15-30% Thinner 900 |
| Touch dry | 2-3 hours (20 ° C) |
| Overcoating time | 24 hours (20 ° C) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Recommended dry thickness | 40-50 microns per hand |
| Theoretical yield m2 / liter | 7-9 |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
-
Marine Paints, International
International Interswift 6600 20L
Interswift 6600 is a patented, high volume solids, hydrolysing, self-polishing antifouling incorporating unique copper acrylate SPC technology. An economical alternative to Interswift 6800HS, Interswift 6600 can be used at Newbuilding and Maintenance & Repair for in-service periods of up to 60 months.
SKU: n/a -
Marine Paints, Jotun
Jotamastic 80 Blk /4.6 L Comp A 4L +B 0.6L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub-zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Megayacht Imperial AF Black 5L
- This is a one component hydrolysing silyl acrylate antifouling coating.
- It provides excellent fouling protection and incomparable hull performance. This is achieved through highly predictable and stable self polishing characteristics reducing hull deterioration, friction and speed loss.
- To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium, carbon steel, composite and wood substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a
There are no reviews yet.