Skipper’s Line Epoxy Light Filler NS 36L
Two-component epoxy filler for high thicknesses with low specific weight for leveling surfaces of iron, aluminum or light alloy boats and cement masonry in general. Very flexible filler applicable in a single pass. Its low specific weight makes it possible to contain the weight of the product applied to the painted product. Widely used in painting cycles for boats, it tolerates very high temperature changes without problems of sagging, loss of thickness or application difficulties. This grout is the result of in-depth research and testing in direct contact with professional applicators which have allowed us to develop this highly qualitative product.
3,098.00 Dhs
CompareSUBSTRATE PREPARATION AND APPLICATION CYCLE
Ferro. SA 2.5 grade sandblasting. Apply a coat of primer EPOFOND AM/9. After 12 hours, sand and apply EPOXY LIGHT FILLER NS and leave to dry for 24-48 hours. Apply PLAMUR FINISHER MDF if necessary, to obtain perfect levelling. Sand and proceed with the chosen finishing cycle.
Aluminum and light alloys. Mechanically remove the oxidized surface layer. Remove dust and residues from the surface and degrease with Thinner 765. Apply a coat of EPOFOND AM-9 primer. After 12 hours apply EPOXY LIGHT FILLER NS leaving to dry for 24-48 hours. Apply PLAMUR FINISHER MDF if necessary, to obtain perfect levelling. Sand and proceed with the chosen finishing cycle.
| color | Green |
|---|
| Typology | Two-component |
| Type of binder sol a | Epoxy |
| Type of binder sol b | Amine adduct |
| Color code sol a | 7F5951 |
| G color code b | 8Z5952 |
| Specific weight kg/litre (±0.05) | 0.750 (A) – 0.750 (B) |
| Dry residue (volume) | 100% |
| Ford viscosity | Thixotropic (A+B) |
| Storage +23°C (±2) | 30 months in sealed containers |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
-
-
Marine Paints, Jotun
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
There are no reviews yet.