Jotun
Showing 1–24 of 44 results
-
Marine Paints, Jotun
Jotamastic 80 Blk /18.3 L Comp A 16L +B 2.3L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces.
- It can be applied at sub-zero surface temperatures.
SKU: n/a -
Jotun, Marine Paints
Jotamastic 80 Blk /4.6 L Comp A 4L +B 0.6L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub-zero surface temperatures.
SKU: n/a -
-
Jotun, Marine Paints
Jotun Aluminium Paint H.R.
Typical use
Exhaust pipes, process piping and engine parts.Colours
AluminiumThinner/Cleaning solvent
Thinner: Jotun Thinner No. 2SKU: n/a -
Marine Paints, Jotun
Jotun Barrier Smart Pack
Protective:
Suitable for structural steel and piping exposed in corrosivity categories up to CX (ISO 12944-2). Recommended
for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural
steel. Specially designed as a primer for coating systems where extended durability is required.SKU: n/a -
Marine Paints, Jotun
Jotun Epoxy Filler Offwhite 2.5L Comp A 1.5L+ Comp B 1L
This is a two component non shrinking solvent free epoxy filler. It is high strength, providing the abrasion
resistance and compressive strength higher than concrete. To be used as filler only. Suitable for properly
prepared concrete surfaces.SKU: n/a -
Marine Paints, Jotun
Jotun Hardtop Design Metallics
Protective:
Recommended for bridges and buildings. Suitable for a wide range of industrial structuresSKU: n/a -
Marine Paints, Jotun
Jotun Hardtop Flexi
Marine:
Recommended for topside, container deck and superstructure.
Protective:
Recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a wide
range of industrial structures.SKU: n/a -
Marine Paints, Jotun
Jotun Hardtop Flexi
Marine:
Recommended for topside, container deck and superstructure.
Protective:
Recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a wide
range of industrial structures.SKU: n/a -
Marine Paints, Jotun
Jotun Hardtop One
Typical use
Marine:
Recommended for topside, deck and superstructure.
Protective:
Recommended for offshore environments, refineries, power plants, bridges and buildings.SKU: n/a -
Marine Paints, Jotun
Jotun Jotamastic Smart Pack HB
General:
Primarily designed for smaller maintenance and repair jobs.
Protective:
Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and
general structural steel.
Marine:
Outside hulls, exterior and interior areas, including water ballast tanks.SKU: n/a -
Marine Paints, Jotun
Jotun Megacote
Exterior and interior areas, including hulls, above and below waterline, superstructures, decks and water ballast
tanks. Suitable for osmosis prevention on composite hulls.SKU: n/a -
Marine Paints, Jotun
Jotun Megafiller 20L Comp A 10L+ Comp B 10L
SPECIAL OFFER! LIMITED STOCK!
This is a two component epoxy fairing compound/filler. It is an ultra lightweight, very flexible, solvent free
product. It has excellent application and sanding properties, strong adhesion and minimal shrinkage. Suitable
for correctly prepared primed surfaces on carbon steel, aluminium, composite and wood substrates.SKU: n/a -
Marine Paints, Jotun
Jotun Megafiller Multi
Exterior areas, including hull, above and below waterline, superstructure and decks. Apply by trowel or fairing
board to fair surface deflections of metal or composite substrates.SKU: n/a -
Marine Paints, Jotun
Jotun Megagloss AC
Exterior areas, including hull, above waterline and superstructure.
Repairs by polishing/buffing is possible. For further advice please contact your local Jotun office.SKU: n/a -
Marine Paints, Jotun
Jotun Megaprimer 5L Comp A 4L+ Comp B 1L
This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a sandable, high
build, all purpose coating. Can be used as primer or sealer for fillers in atmospheric and immersed environments.
Suitable for properly prepared carbon steel, aluminium, shop primed steel, composite and wooden substratesSKU: n/a -
Marine Paints, Jotun
Jotun Megasealer
Suitable as tie coat for a wide range of Jotun Megayacht antifouling products.
SKU: n/a -
Jotun, Marine Paints
Jotun Nonstop II White 2.5 L
- This is a self polishing antifouling. It is based on a unique binder combination system.
- It is a high performance product providing excellent fouling protection.
- It assures a totally active surface continuously renewed providing a clean hull for the whole season.
SKU: n/a -
Marine Paints, Jotun
Jotun Penguard Pro GF
Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed.
Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings
and mining equipment. Specially designed as a universal product in coating systems where extended durability
is required. The product provides great flexibility in choice of dry film thickness range as well as area of use.
Designed for areas where increased abrasion and impact resistance is needed such as decks, walkways and
landing areas.SKU: n/a -
-
Marine Paints, Jotun
Jotun Safeguard Universal ES Plum 18L Comp A 15L+ Comp B 3L
Jotun Paint Thinner designed to improve the flow of Jotun polyurethane coatings.
SKU: n/a -
-
Marine Paints, Jotun
Jotun Seamate M
Marine:
Primarily designed for maintenance and repair. Designed for vessels trading at a wide range of speed and
activity. The product is designed for long service periods and can be used up to 90 months as a part of a
complete coating system.SKU: n/a -
Marine Paints, Jotun
Jotun Seaquantum Classic 111
Marine:
Recommended for underwater hull in newbuilding and drydocking. Designed as a premium solution for vessels
trading at a wide range of speed and activity, where the main focus is long term hull performance and fuel
saving. The product is designed for long service periods and can be used up to 90 months as a part of a
complete coating system.SKU: n/a
