Kicker, Marine, Marine Subwoofers
45KM124 12″ 4Ω Marine Subwoofer
Availability:
Available on backorder
SHOCK WAVES
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs.
FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
966.00 Dhs
Available on backorder
CompareThe KICKER® KM 12-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat.
| Woofer(in,mm) |
| 12, 30 |
| Impedance (OHMS) |
| 4 SVC |
| Peak Power (watts, per ANSI/CTA-2031-A) |
| 350 |
| Recommended Amplifier Power (watts RMS) |
| 175 |
| Sealed Enclosure Volume Min-Max(ft³, L) |
| 1.25-3.5, 25.4-99.1 |
| Vented Enclosure Volume Min-Max(ft³, L) |
| 1.75-2.25, 49.6-63.7 |
| Frequency Response(Hz) |
| 30-500 |
| Mounting Depth(in, cm) |
| 5.5, 13.9 |
| Hole Diameter(in, cm) |
| 11, 27.9 |
| Outer Diameter(in, cm) |
| 13, 32.95 |
| What’s in the Box: |
| 1 – 12″ Woofer 1 – Back gasket 8 – Mounting screws 8 – Mounting screw clips 1 – Manual |
Brand
Kicker Audio Systems
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
-
-
Kicker, Marine, Marine Subwoofers
45KM124 – 12″ 4Ω Freeair Marine Subwoofer
BUMP THE BOAT
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KMF series of subs.
FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
SKU: n/a -
There are no reviews yet.