- Premium multi season copolymer antifouling for the harshest fouling areas
- 24 months protection from one application
- Can be applied up to 12 months before launch
Marine Paints, International
International Micron 350 Antifouling Paint 2.5L
Micron antifoul has been a favourite for years among YouBoat customers, and the latest formula is no different. Micron 350 is a high strength self polishing antifouling that will offer excellent 2 seasons protection from just one application (3-4 coats)
525.00 Dhs
CompareRelated products
-
Marine Paints, Jotun
Penguard HB white 5 L Comp A 4L+B 1L
- This is a two component, polyamide cured, high molecular weight epoxy coating.
- Designed as a high build, all purpose coating for new construction.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.
- Suitable for properly prepared carbon steel, stainless steel,aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.
SKU: n/a -
Marine Paints, Jotun
Jotamastic 80 Blk /4.6 L Comp A 4L +B 0.6L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub-zero surface temperatures.
SKU: n/a -
Marine Paints, International
International Primocon 2.5L
- Conventional one-part primer for use below water.
- Quick drying, with anticorrosive properties.
- Can be used under all major antifouling or as a conversion coat over incompatible or unknown antifouling.
SKU: n/a -
Marine Paints, Jotun
Seaforce Active Dark Red 20L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides good fouling protection. This is achieved through self polishing characteristics reducing hull deterioration.
- To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a
There are no reviews yet.