Substrates: Aluminium, GRP/FRP, Lead, Steel, Wood, Carbon Fibre & Cast Iron.
Marine Paints, International
International Primocon 2.5L
- Conventional one-part primer for use below water.
- Quick drying, with anticorrosive properties.
- Can be used under all major antifouling or as a conversion coat over incompatible or unknown antifouling.
394.00 Dhs
CompareRelated products
-
Marine Paints, Jotun
Seaforce Active Plus D Red 5L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss.
- To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures
SKU: n/a -
Marine Paints, Jotun
Seaforce Active Plus D Red 20L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss.
- To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures
SKU: n/a -
Marine Paints, Jotun
Jotamastic 80 Blk /18.3 L Comp A 16L +B 2.3L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces.
- It can be applied at sub-zero surface temperatures.
SKU: n/a -
Marine Paints, International
International ultra 300 Antifouling 2.5L (Grey)
- Premium hard boat antifoul – allows scrubbing and polishing – ultra-smooth finish
- Suitable for below waterline (hull)
- Not to be used on aluminium propellers
- Substrates: GRP/FRP, Lead, Steel and Wood
- Tin size 2.5l
SKU: n/a
There are no reviews yet.