Marine Paints, International
International Interswift 6600 20L
Interswift 6600 is a patented, high volume solids, hydrolysing, self-polishing antifouling incorporating unique copper acrylate SPC technology. An economical alternative to Interswift 6800HS, Interswift 6600 can be used at Newbuilding and Maintenance & Repair for in-service periods of up to 60 months.
1,680.00 Dhs
Compare- Volume solids 58% ± 2% (ISO 3233:1998)
- Surface preparation Interswift 6600 should be applied over a recommended primer coating scheme.
- Typical film thickness 75 – 150 microns dry & 129 – 259 microns wet
| Volume | 20L |
|---|
Brand
International
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, Jotun
Seaforce Active Dark Red 20L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides good fouling protection. This is achieved through self polishing characteristics reducing hull deterioration.
- To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Jotamastic 80 Blk /4.6 L Comp A 4L +B 0.6L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub-zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Penguard HB white 5 L Comp A 4L+B 1L
- This is a two component, polyamide cured, high molecular weight epoxy coating.
- Designed as a high build, all purpose coating for new construction.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments.
- Suitable for properly prepared carbon steel, stainless steel,aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.
SKU: n/a
There are no reviews yet.