-
×
Seaforce Active Dark Red 20L
1 × 0.00 Dhs
Seaforce Active Dark Red 20L Subtotal: 0.00 Dhs
Marine Paints, Jotun
Jotun Safeguard Universal ES Plum 18L Comp A 15L+ Comp B 3L
Jotun Paint Thinner designed to improve the flow of Jotun polyurethane coatings.
0.00 Dhs
CompareDesigned to improve the flow and levelling properties when spraying Jotun polyurethane coatings in average/ moderate temperature conditions. May be blended with Jotun Thinner No. 19 when spraying in cold conditions, or with Jotun Thinner No. 12 when spraying in hot conditions. Can also be used as cleaner for pumps and tools before and after painting.
Related products
-
Marine Paints, International
International Interspeed 6600 20L
TBT free, controlled depletion polymer (CDP) self polishing antifouling system.
- For use at Newbuilding or Maintenance & Repair.
- In repair situations Interspeed 6200 can be applied directly over existing antifoulings.
SKU: n/a -
Marine Paints, Jotun
Jotamastic 80 Blk /18.3 L Comp A 16L +B 2.3L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces.
- It can be applied at sub-zero surface temperatures.
SKU: n/a -
Marine Paints, International
International Interswift 6600 20L
Interswift 6600 is a patented, high volume solids, hydrolysing, self-polishing antifouling incorporating unique copper acrylate SPC technology. An economical alternative to Interswift 6800HS, Interswift 6600 can be used at Newbuilding and Maintenance & Repair for in-service periods of up to 60 months.
SKU: n/a -
Marine Paints, Jotun
Seaforce Active Plus D Red 20L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss.
- To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures
SKU: n/a
There are no reviews yet.