Jotun Tankguard Storage
Typical use Protective:
Specially designed as an internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. Can be used in pressure vessels. This coating has very good resistance to high temperature products. Refer to Protective Product Resistance List
0.00 Dhs
CompareThis is a two component polyamine cured phenolic/novolac epoxy coating. It is a specially designed tank lining
with excellent chemical resistance. Can be used as primer, mid coat or finish coat in atmospheric and immersed
environments. Suitable for properly prepared carbon steel, galvanized steel, stainless steel and concrete
substrates
| Volume | 18L |
|---|
Brand
Jotun Paints
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, Jotun
Jotamastic 80 Blk /18.3 L Comp A 16L +B 2.3L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces.
- It can be applied at sub-zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Jotun Epoxy Filler Offwhite 2.5L Comp A 1.5L+ Comp B 1L
This is a two component non shrinking solvent free epoxy filler. It is high strength, providing the abrasion
resistance and compressive strength higher than concrete. To be used as filler only. Suitable for properly
prepared concrete surfaces.SKU: n/a -
Marine Paints, Jotun
Seaforce Active Dark Red 20L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides good fouling protection. This is achieved through self polishing characteristics reducing hull deterioration.
- To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a
There are no reviews yet.