KMFC11W HLCD Tower System with flat, 2.5-inch bolt mounting
Available on backorder
6,485.00 Dhs
Available on backorder
CompareEASY MOUNT & MORE
KICKER gear is made for marine use. Injection-molded woofer cones are made of UV-treated polypropylene with Santoprene® surrounds, providing excellent durability in any weather. Even our enclosures are next level, integrating a UV-resistant inhibitor to prevent fading or discoloring over years of use. All of our HLCD (horn-loaded compression-driver) Systems meet or exceed ASTM standards for humidity** and UV exposure*** and come with mounting hardware forged from rustproof, 316L stainless-steel.
Watch the LEDs light up the night in any one of seven colors, or upgrade to 20 colors and 19 lighting modes with the wireless KMLC LED Remote controller (sold separately). Don’t just be the life of the party – be the reason for it.
BUILT RIGHT
- Mounts to Flat Factory Tower-Speaker Hardpoints with 2.5-inch Bolt Spacing and Hidden Wires
- Four-Ohm Voice Coil
- High-Frequency Horn Design with Titanium-Dome Compression Drivers
- Stitched Polypropylene Cone with Santoprene Surround
- UV-Resistant Polymer Basket
- 316L Stainless Mounting Hardware Included
- Seven Color LED Grilles Included*
- Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***
*Upgradable to 20 Colors and 19 Lighting Modes with KMLC.
**ASTM G154 400 hr. Accelerated UV Test
***ASTM B117 200 hr. Salt Fog Test
The KMFC 9″ Coaxial Tower System works best with 300 watts of recommended power.
Adjustable Logo
On all KMFC, KMTC and KMTE products the logo is manually adjustable to 180 degrees.
| Woofer (in, cm) |
| 11, 28 |
| Horn Loaded Compression Driver (in, cm) |
| 1.4, 3.5 |
| Dome Material |
| Titanium |
| Rated Impedance (ohms) |
| 4 |
| Peak Power (watts, per ANSI/CTA-2031-A) |
| 600 |
| Recommended Amplifier Power (watts RMS) |
| 150-300 |
| Sensitivity (1W, 1m) |
| 93 |
| Frequency Response (Hz) |
| 20-20k |
| LED Lighting |
| Yes |
| What’s in the Box: |
| 2 loaded enclosures 2 vehicle mounting brackets 1 hardware pack, with anti-seize compound 2 vehicle wiring harness pigtails 2 grille mounted Kicker badges(loose in poly bag) 1 CIC or install manual |
Brand
Kicker Audio Systems
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Kicker, Marine, Marine Subwoofers
45KM124 – 12″ 4Ω Freeair Marine Subwoofer
BUMP THE BOAT
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KMF series of subs.
FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
SKU: n/a -
-
Kicker, Marine, Marine Subwoofers
45KM122 – 12″ 2Ω Marine Subwoofer
MAKIN’ WAVES
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs. Put it in a sealed or vented enclosure, and you’ve got some fun times ahead!
FEATURES
- Two-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
SKU: n/a
There are no reviews yet.