Skipper’s Line Epoxy Light Filler NS 5L
Two-component epoxy filler for high thicknesses with low specific weight for leveling surfaces of iron, aluminum or light alloy boats and cement masonry in general. Very flexible filler applicable in a single pass. Its low specific weight makes it possible to contain the weight of the product applied to the painted product. Widely used in painting cycles for boats, it tolerates very high temperature changes without problems of sagging, loss of thickness or application difficulties. This grout is the result of in-depth research and testing in direct contact with professional applicators which have allowed us to develop this highly qualitative product.
525.00 Dhs
CompareSUBSTRATE PREPARATION AND APPLICATION CYCLE
Ferro. SA 2.5 grade sandblasting. Apply a coat of primer EPOFOND AM/9. After 12 hours, sand and apply EPOXY LIGHT FILLER NS and leave to dry for 24-48 hours. Apply PLAMUR FINISHER MDF if necessary, to obtain perfect levelling. Sand and proceed with the chosen finishing cycle.
Aluminum and light alloys. Mechanically remove the oxidized surface layer. Remove dust and residues from the surface and degrease with Thinner 765. Apply a coat of EPOFOND AM-9 primer. After 12 hours apply EPOXY LIGHT FILLER NS leaving to dry for 24-48 hours. Apply PLAMUR FINISHER MDF if necessary, to obtain perfect levelling. Sand and proceed with the chosen finishing cycle.
| color | Green |
|---|
| Typology | Two-component |
| Type of binder sol a | Epoxy |
| Type of binder sol b | Amine adduct |
| Color code sol a | 7F5951 |
| G color code b | 8Z5952 |
| Specific weight kg/litre (±0.05) | 0.750 (A) – 0.750 (B) |
| Dry residue (volume) | 100% |
| Ford viscosity | Thixotropic (A+B) |
| Storage +23°C (±2) | 30 months in sealed containers |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, International
International Micron 350 Antifouling Paint 2.5L
Micron antifoul has been a favourite for years among YouBoat customers, and the latest formula is no different. Micron 350 is a high strength self polishing antifouling that will offer excellent 2 seasons protection from just one application (3-4 coats)
SKU: n/a -
Marine Paints, International
International Interswift 6600 20L
Interswift 6600 is a patented, high volume solids, hydrolysing, self-polishing antifouling incorporating unique copper acrylate SPC technology. An economical alternative to Interswift 6800HS, Interswift 6600 can be used at Newbuilding and Maintenance & Repair for in-service periods of up to 60 months.
SKU: n/a -
Marine Paints, International
International Intergard 5600 20L
A light coloured, epoxy universal primer
- For use as an anticorrosive universal primer in ballast tanks, outer hull, cofferdams, void spaces, decks, cargo holds and crude oil tanks.
- Suitable for use with controlled cathodic protection.
- For use at Newbuilding or Maintenance & Repair.
SKU: n/a -
Marine Paints, Jotun
Jotamastic 80 Blk /18.3 L Comp A 16L +B 2.3L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces.
- It can be applied at sub-zero surface temperatures.
SKU: n/a
There are no reviews yet.