PREPARATION OF THE SUPPORT AND APPLICATION CYCLE
NEW IRON SUPPORTS. Sandblasting to SA 2.5 SIS grade is required. Apply EPOZINC 1C diluted 5-10% with Diluente 400.
One-component zinc coating with high zinc content, easier to apply than two-component galvanizing coatings. Often used on carpentry structures to obtain an excellent anticorrosive effect.
0.00 Dhs
ComparePREPARATION OF THE SUPPORT AND APPLICATION CYCLE
NEW IRON SUPPORTS. Sandblasting to SA 2.5 SIS grade is required. Apply EPOZINC 1C diluted 5-10% with Diluente 400.
color | Grey |
---|
Typology | Single component |
Type of binder sol a | Modified alkyd |
Specific weight kg / l (± 0.05) | 2.220 |
Dry residue (volume) | 31% |
Viscosity ford | 26 |
Application | Roller and spray brush |
Brush-roller dilution | 5-10% Thinner 400 |
Spray dilution | 5-10% Thinner 400 |
Touch dry | 15-30 minutes (20 ° C) |
Overcoating time | 12-24 hours (20 ° C) |
Application temperature | Between +10 c and +40 c |
Relative humidity | Less than 80% |
Recommended dry thickness | 50 microns per hand |
Theoretical yield m2 / liter | 4-5 |
Only logged in customers who have purchased this product may leave a review.
SPECIAL OFFER! LIMITED STOCK!
This is a two component epoxy fairing compound/filler. It is an ultra lightweight, very flexible, solvent free
product. It has excellent application and sanding properties, strong adhesion and minimal shrinkage. Suitable
for correctly prepared primed surfaces on carbon steel, aluminium, composite and wood substrates.
Thinner No.3 is suitable for antifouling paints (except for VC® products), bottom coatings and other special paints. It’s also used to help spray on our one-part varnishes and finishes.
Order Skippers Line Epozinc 1C
There are no reviews yet.