Skippers Line Epozinc 2C
Two-component epoxy coating formulated with a high metallic zinc content. It is applied as a primer on sandblasted substrates in protective painting cycles for metal structures subject to immersion in water or to atmospheric exposure. Also used as a primer for cold galvanizing. The product must necessarily be applied within 6 hours of sandblasting. The product resists up to temperatures of 250 ° C when dry.
0.00 Dhs
ComparePREPARATION OF THE SUBSTRATE AND APPLICATION CYCLE
Iron. It is essential to sandblast to SA 2.5 grade before applying EPOZINC 2C. The product must necessarily be applied within 6 hours of sandblasting the substrate. Apply EPOZINC 2C according to the recommended dilutions and then over paint with the defined painting cycle.
| color | White |
|---|
| Typology | Two-component |
| Type of binder sol a | Polyester |
| Type of binder sol b | Isocyanates |
| Specific weight kg / l (± 0.05) | 1,640 (A) – 1,000 (B) |
| Dry residue (volume) | 43% |
| Storage + 23 ° C (± 2) | 24 months in sealed containers |
| 120-150 sec. (A + B) |
| Application | Roller and spray brush |
| Blend a + b by volume | 5 parts Sol A with 2 Sol. B |
| Pot life a + b (20c) | Use mixture within 6-8 hours |
| Brush-roller dilution | 15-30% Thinner 205 |
| Spray dilution | 25-35% Thinner 203 |
| Touch dry | 3-4 hours (20 ° c) |
| Overcoating time | 12-24 hours (20 ° c) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Recommended dry thickness | 35-40 microns per hand |
| Theoretical yield m2 / liter | 14-15 |
Brand
Skipper's Line Yacht Coatings - Made in Italy
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Marine Paints, Jotun
Jotun Megaprimer 5L Comp A 4L+ Comp B 1L
This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a sandable, high
build, all purpose coating. Can be used as primer or sealer for fillers in atmospheric and immersed environments.
Suitable for properly prepared carbon steel, aluminium, shop primed steel, composite and wooden substratesSKU: n/a -
Marine Paints, Jotun
Jotamastic 80 Blk /18.3 L Comp A 16L +B 2.3L
- This is a two-component polyamine cured epoxy mastic coating.
- It is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or required.
- Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments.
- Suitable for properly prepared carbon steel and aged coating surfaces.
- It can be applied at sub-zero surface temperatures.
SKU: n/a
There are no reviews yet.