Recommended Products
Skipper’s Line Epofond AM-9
Satin coating for iron, aluminum, light alloys, wood, plastic and concrete. Used as a primer or undercoat in nautical cycles, it is also suitable for flooring and for tanks containing oils, naphtha, kerosene and soda solutions. It develops a non-toxic film that can be overpainted with chlorinated rubber, acrylic and polyurethane products, providing an anchoring base and a long-lasting anti-corrosion barrier.
Skipper’s Line Mako
Skipper’s Line Propshark
Skipper’s Line Epoxy Light Filler NS 36L
Skipper’s Line Epoxy Light Filler NS 36L
Two-component epoxy filler for high thicknesses with low specific weight for leveling surfaces of iron, aluminum or light alloy boats and cement masonry in general. Very flexible filler applicable in a single pass. Its low specific weight makes it possible to contain the weight of the product applied to the painted product. Widely used in painting cycles for boats, it tolerates very high temperature changes without problems of sagging, loss of thickness or application difficulties. This grout is the result of in-depth research and testing in direct contact with professional applicators which have allowed us to develop this highly qualitative product.
Skipper’s Line Epoxy Light Filler NS 20L
Skipper’s Line Epoxy Light Filler NS 20L
Two-component epoxy filler for high thicknesses with low specific weight for leveling surfaces of iron, aluminum or light alloy boats and cement masonry in general. Very flexible filler applicable in a single pass. Its low specific weight makes it possible to contain the weight of the product applied to the painted product. Widely used in painting cycles for boats, it tolerates very high temperature changes without problems of sagging, loss of thickness or application difficulties. This grout is the result of in-depth research and testing in direct contact with professional applicators which have allowed us to develop this highly qualitative product.
Skipper’s Line Epoxy Light Filler NS 5L
Skipper’s Line Epoxy Light Filler NS 5L
Two-component epoxy filler for high thicknesses with low specific weight for leveling surfaces of iron, aluminum or light alloy boats and cement masonry in general. Very flexible filler applicable in a single pass. Its low specific weight makes it possible to contain the weight of the product applied to the painted product. Widely used in painting cycles for boats, it tolerates very high temperature changes without problems of sagging, loss of thickness or application difficulties. This grout is the result of in-depth research and testing in direct contact with professional applicators which have allowed us to develop this highly qualitative product.
Skippers Line Contender Propellers
Acrylic-based antifouling for propellers, motor feet and flaps with high adhesive power and resistance to strong stresses. It is applied in 2 coats, after applying 1 coat of Eliprimer type primer on propellers sanded with coarse-grained paper and degreased with water-soluble detergent (do not use solvents to degrease). It is applied directly on previous layers of paint if well anchored. Do not apply on previous antifoulings of different types.
Skippers Line Contender 2.5L
Long-lasting and reliable antifouling with a hard matrix with a high percentage of cuprous oxide and special substances, ideal especially for use in warm seas. It offers a safe protection on the hull, after applying an appropriate primer. It is applied on wooden, iron and fiberglass hulls (not suitable for aluminum hulls). Suitable for speeds even above 30 knots.
Skippers Line Serenissima 2.5L
Long lasting and high quality hydrophilic matrix antifouling for boats with speeds up to 30 knots. By virtue of the high content of copper salts with suitable synergists, and the particular formulation of the vehicle, it guarantees excellent antifouling power in the most diverse operating conditions. Being its vehicle of hydrophilic nature, therefore “close” to the water, it increases the wettability and smoothness of the hull in the water. It is also effective in warm seas and mixed waters. Having a “controlled” release speed of antifouling salts, it can be used both on medium speed hulls and on sailboats. Not suitable for application on aluminum hulls. The application of at least 2 coats is required.
Skippers Line Eliprimer 1C
Primer with direct adhesion on metals such as brass, bronze, aluminum and stainless steel. Suitable for overcoating with both single-component and two-component products and in particular, on boat propellers, with CONTENDER ELICHE antifouling. It offers excellent anchoring to the substrate and easy adhesion of subsequent coats.
Skippers Line Epofond H.B Sol A 2.5L + Solv B 0.625L
Skippers Line Epofond H.B Sol A 2.5L + Solv B 0.625L
High thickness satin epoxy coating, suitable for all types of substrates, recommended as a preventive osmosis treatment on fiberglass boats. The advantage of obtaining thicknesses from 100-150 microns dry per coat allows to reduce the processing costs related to the application. Overpaintable with chlorinated rubber, epoxies, polyurethanes for anticorrosive cycles of excellent quality and duration. Of exceptional chemical resistance and resistance to the marine environment both in the atmosphere and in immersion.
Boss Audio Systems MPWT40BRGB
4″ 2-Way 400W Waketower (Sold in Pairs)
Jotun Tankguard Storage
Typical use Protective:
Specially designed as an internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. Can be used in pressure vessels. This coating has very good resistance to high temperature products. Refer to Protective Product Resistance List
Shop
Showing 505–528 of 623 results
-
Marine Paints, Jotun
Seaforce Active Dark Red 20L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides good fouling protection. This is achieved through self polishing characteristics reducing hull deterioration.
- To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Seaforce Active Dark Red 5L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides good fouling protection. This is achieved through self polishing characteristics reducing hull deterioration.
- To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Marine Paints, Jotun
Seaforce Active Plus D Red 20L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss.
- To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures
SKU: n/a -
Marine Paints, Jotun
Seaforce Active Plus D Red 5L
- This is a one component acrylic, hydrolysing antifouling coating based on hydractive technology.
- It provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss.
- To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures
SKU: n/a -
Marine Paints, Jotun
Seaforce Shield 5L
- This is a one component high solids hydrolysing antifouling coating based on ion exchange technology.
- It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull
deterioration. - To be used as finish coat in immersed environments only.
- Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
- It can be applied at sub zero surface temperatures.
SKU: n/a -
Stainless Steel Hardware, Screws, Boxes with Assorted Screws
Selection of Stainless Steel Nuts
CODE 37.300.10
Selection of 60 nuts AISI 304* 4-mm thread length, 5-mm total length, flat head; 5-mm thread length, 5-mm total length, flat head; 5-mm thread length, 6-mm total length, point head; 6-mm thread length, 6-mm total length, flat head; 1/4″ thread length, 5-mm total length, point head. SKU: n/a -
Clearance Sale
Simrad SONAR Hub Module-000-11142-001
Compatible with the complete line of Simrad NSS Sport, NSE Expert and NSO Offshore multifunction displays, the plug-and-play network solution makes it easier than ever to identify productive fishing areas with connectivity to the latest Simrad sonar technologies – including StructureScan® HD and CHIRP.SKU: n/a -
Marine Paints, Skippers Line, Primers and Undercoats -Made in Italy
Skipper’s Line Epofond AM-9
Satin coating for iron, aluminum, light alloys, wood, plastic and concrete. Used as a primer or undercoat in nautical cycles, it is also suitable for flooring and for tanks containing oils, naphtha, kerosene and soda solutions. It develops a non-toxic film that can be overpainted with chlorinated rubber, acrylic and polyurethane products, providing an anchoring base and a long-lasting anti-corrosion barrier.
SKU: n/a -
Marine Paints, Skippers Line, Primers and Undercoats -Made in Italy
Skipper’s Line Epoxy Light Filler NS 20L
Marine Paints, Skippers Line, Primers and Undercoats -Made in ItalySkipper’s Line Epoxy Light Filler NS 20L
Two-component epoxy filler for high thicknesses with low specific weight for leveling surfaces of iron, aluminum or light alloy boats and cement masonry in general. Very flexible filler applicable in a single pass. Its low specific weight makes it possible to contain the weight of the product applied to the painted product. Widely used in painting cycles for boats, it tolerates very high temperature changes without problems of sagging, loss of thickness or application difficulties. This grout is the result of in-depth research and testing in direct contact with professional applicators which have allowed us to develop this highly qualitative product.
SKU: n/a -
Marine Paints, Primers and Undercoats -Made in Italy, Skippers Line
Skipper’s Line Epoxy Light Filler NS 36L
Marine Paints, Primers and Undercoats -Made in Italy, Skippers LineSkipper’s Line Epoxy Light Filler NS 36L
Two-component epoxy filler for high thicknesses with low specific weight for leveling surfaces of iron, aluminum or light alloy boats and cement masonry in general. Very flexible filler applicable in a single pass. Its low specific weight makes it possible to contain the weight of the product applied to the painted product. Widely used in painting cycles for boats, it tolerates very high temperature changes without problems of sagging, loss of thickness or application difficulties. This grout is the result of in-depth research and testing in direct contact with professional applicators which have allowed us to develop this highly qualitative product.
SKU: n/a -
Marine Paints, Skippers Line, Primers and Undercoats -Made in Italy
Skipper’s Line Epoxy Light Filler NS 5L
Marine Paints, Skippers Line, Primers and Undercoats -Made in ItalySkipper’s Line Epoxy Light Filler NS 5L
Two-component epoxy filler for high thicknesses with low specific weight for leveling surfaces of iron, aluminum or light alloy boats and cement masonry in general. Very flexible filler applicable in a single pass. Its low specific weight makes it possible to contain the weight of the product applied to the painted product. Widely used in painting cycles for boats, it tolerates very high temperature changes without problems of sagging, loss of thickness or application difficulties. This grout is the result of in-depth research and testing in direct contact with professional applicators which have allowed us to develop this highly qualitative product.
SKU: n/a -
Marine Paints, Skippers Line, Antifouling- Made in Italy
Skipper’s Line Mako
Self-polishing antifouling, based on acrylate and copper copolymers. It offers excellent antifouling power and high performance in alternating use conditions. It is formulated to have a controlled release of antifouling salts* and consumption of the product film, which allow it to last for several years (depending on the thicknesses applied). It is suitable for large boats, mega yachts and sailing boats. (*) These biocidal substances restrict the use of this product exclusively on a professional level.SKU: n/a -
Marine Paints, Skippers Line, Antifouling- Made in Italy
Skipper’s Line Propshark
Biocide-free antifouling paint, with excellent expansion, scratch-resistant, hard and elastic. It is characterized by high slipperiness and anti-adhesion, which facilitates surface cleaning, used as a finishing coat in the nautical sector, it reduces the attack of marine fouling, especially both hard and soft fouling. Recommended for propellers where speed and the turbulence generated by the rotation helps keep the surface clean. Biocide-free product.SKU: n/a
